Jezet

home

 

contact

 

home english

 JEZET Restoration Machines bv
 Beatrixlaan 5
 4645 HD  PUTTE
 The Netherlands

 T  +31(0)164606493
 F  +31(0)164606495

 E  info@jezet-restoration-machines.com

 W www.jezet-restoration-machines.com

Suction Cabinets, Fume Cupboards and Extraction units special for Restoration treatments

 

In follow-up and completion of the line of restoration devices and machines, Jezet has also done a development and the start of a production of existing devices, but then specially adapted to treatments for restoration and conservation.

 

 

All in service of preservationists with treatments of authentic and often unique documents, charters, books and objects

 

 

First simple often Plastic laminated wooden customized fume extraction cabinets, but later only own design suction cabinets, manufactured from inert, acid- and solvent resistant materials such as anodised Aluminium, Trespa, Polyethylene, Polypropylene, Teflon, Silicone etc

 

JEZET offer 3 executions

 

ZKWT  The most common type fume cupboard with the standard worktop, which is adjustable in height and with or without the under bench storage cabinets.

ZKSI  The step-in or bring-in type exhaust cabinet with a very low positioned and removable worktop,  enables tall objects to be installed,.

ZKDI  The drive-in type exhaust cabinet, one side open and attainable from two sides. Enables to drive in worktables, vacuum tables or to install very tall objects etc.

 

 

3 standard size inside dimensions 1200 x 800 - 1500 x 800 - 1800 x 800 mm - opening height 800 or 1200 or 1800 mm, but are also able to manufacture ever size in between and to particular requirements.

 

 

The advantages of the JEZET SUCTION CABINETS

Total set-up or Custom built to circumstances, adaptable on size and dimensions, on treatments or on special demands of the restorer

Dismountable built or as one plug and play ready machine

Very good visibility or Double sided visibility or double sided attainable in combination with vacuum tables or other apparatuses or machines

Safe, Simple and Easy to operate (ergonomic forms everything within hand reach) Simple to learn and needs no special skill or knowledge nor strength

Made of all inert materials Aluminium, Trespa, Polyethylene, Polypropylene, Teflon, Silicone

Spark-proof for use with inflammable solvents - Pure solvents, Acids and Treatment liquids resisted

Several different adjustable suction and extraction systems and Good exhaust- and air velocity qualities

Electric and Pneumatic safety devices and safety construction and execution, according safety rules of each country

Low electricity consumption - Low noise level - Moderate in total weight

Different filter type systems and/or scrubbers and traptank systems

Direct adaptable to existing exhaust systems - Additional connections to adapt existing components - Special requests

No maintenance only cleaning - Easy to clean - Long service life.

 

JEZET SUCTION CABINET ZKWTOk-180808 (FUME EXTRACTION TYPE) is constructed of a solid and rigid outside framework of aluminium rectangular softline profiles JZ800 on 4 levelling feet, inside panelled with corrosion and acid resisted Trespa plating and toughened glass, therefore strong, rigid, safe and light in weight.

The front side of the suction cabinet is consisting out off a horizontal divided under panel of Trespa because of the in height adjustable worktop as by ZKWT series as well for the other executions to slide the under panel completely out of the way.

The top front is an detachable aluminium bypass grill so that the inside upper part, as the LED light fitment, inside airflow guiding panels and the upper part of the sash glass easily can be reached and cleaned. The horizontal divided sash window made of explosion-safe toughened glass slides in an aluminium multi-rail lined with Teflon and suspended in balance by two counterweights.

The in height adjustable tabletop is panelled with surface made of hard wearing, easy to clean Trespa, resisted to most solvents and acids.

The entire top section of the JEZET Suction cabinets are executed as a series of filter chambers for various sorts of exchangeable filters and filter cartridges, depending of the solvents, Acids and Treatment liquids, which will be used.

The suction cabinet is further provided with an explosion proof fan with adjustable suction velocity, switches for the fan and the 24 safety Voltage LED lighting with indicators and 2 single phase plug sockets 230 V.

 

Work table size

Table height adjustable / Internal height

Opening height maximum

Outside dimensions W x D x H

Noise level

Extract rate minimum - maximum

Outlet diameter

Power consumption / Lighting

Weight

 

 

Options

Cleanable pre-filters

Carbon filters

Hepa filters H14

Table top surface executed in perforated stainless steel top plate

Table top executed with sink, tap and drain

Drain executed with traptank in cupboard

Compressed air connection

 

 

1800 x   800 mm

800 -   950 mm / 800 - 1000 mm

900 mm

1960 x 960 x 2500 mm

65 dB

500- 1600 m3/h

Ø 280 mm

0,30 – 1,50 kW. single phase 230 V -50 Hz. / 20 W

163 kg

 

 

 

depending on the application

depending on the application

depending on the application

JEZET SUCTION CABINET ZKSI-180818 (STEP-IN TYPE) is constructed of a solid and rigid outside framework of aluminium rectangular softline profiles JZ800 on 4 levelling feet, inside panelled with corrosion and acid resisted Trespa plating and toughened glass, therefore strong, rigid, safe and light in weight. The front side of the suction cabinet is completely open. The top front is an detachable aluminium bypass grill so that the inside upper part, as the LED light fitment, inside airflow guiding panels and the upper part of the sash glass easily can be reached and cleaned. The horizontal divided sash window made of explosion-safe toughened glass slides in an aluminium multi-rail lined with Teflon and suspended in balance by two counterweights.

The lowered tabletop is panelled with surface made of hard wearing, easy to clean Trespa, resisted to most solvents and acids.

The entire top section of the JEZET Suction cabinets are executed as a series of filter chambers for various sorts of exchangeable filters and filter cartridges, depending of the solvents, Acids and Treatment liquids, which will be used.

The suction cabinet is further provided with an explosion proof fan with adjustable suction velocity, switches for the fan and the 24 safety Voltage LED lighting with indicators and 2 single phase plug sockets 230 V.

 

 

Work table size

Table height / Internal height

Opening height maximum

Outside dimensions W x D x H

Noise level

Extract rate minimum - maximum

Outlet diameter

Power consumption

Lighting

Weight

 

 

Options

Cleanable pre-filters

Carbon filters

Hepa filters H14

Table top surface executed in perforated stainless steel top plate

Table top executed with sink, tap and drain

Drain executed with traptank in cupboard

Compressed air connection

 

 

1800 x   800 mm

500 mm / 1800 mm

1200 mm

1960 x 960 x 2500 mm

65 dB

600- 2000 m3/h

Ø 315 mm

0,30 – 1,50 kW. single phase 230 V -50 Hz.

20 W

140 kg

 

 

 

depending on the application

depending on the application

depending on the application

JEZET SUCTION CABINET ZKDI-180818 (DRIVE-IN TYPE) is constructed of a solid and rigid outside framework of aluminium rectangular softline profiles JZ800 on 4 levelling feet, inside panelled with corrosion and acid resisted Trespa plating and toughened glass, therefore strong, rigid, safe and light in weight. The front side of the suction cabinet is completely open.

The top front is an detachable aluminium bypass grill so that the inside upper part, as the LED light fitment, inside airflow guiding panels and the upper part of the sash glass easily can be reached and cleaned. The horizontal divided sash window made of explosion-safe toughened glass slides in an aluminium multi-rail lined with Teflon and suspended in balance by two counterweights. The suction cabinet is further provided with an explosion proof fan with adjustable suction velocity, switches for the fan and the LED lighting with indicators and 2 single phase plug sockets 230 V

 

 

 

Internal size

Internal height

Opening height A maximum

Outside dimensions W x D x H

Noise level

Extract rate minimum - maximum

Outlet diameter

Power consumption

Lighting

Weight

 

 

Options

Cleanable pre-filters

Carbon filters

Hepa filters H14

Compressed air connection

 

 

1800 x   800 mm

2300 mm

1800 mm

1960 x 960 x 2500 mm

65 dB

800- 2600 m3/h

Ø 315 mm

0,30 – 1,50 kW. single phase 230 V -50 Hz

20 W

120 kg

 

 

 

depending on the application

depending on the application

depending on the application

JEZET SUCTION TABLE STTFwMa45º-1810St manually stepless adjustable in angle to 45º built-up of the following components: SUPPORT FRAME of aluminum profile plus plating on 4 castors with brakes with on top a VACUUM TABLE-TOP of anodized softline profiles JZ800 with a inserted shaped base-plate, a rigid heavy duty support grid all made of aluminum to restrain even a higher vacuum (maximum of  -90 kPa abs. = 125 mBar. = 27 inch Hg) and a perforated working surface made of hard wearing, easy to clean non corrosive, stainless steel permitting a maximum mesh of 35% per square meter. The table top is manually stepless adjustable in angle to 45º vertical.

The table top SUCTION PIPE can be connected with a exhaust unit.

 

 

 

 

Usable Surface Vacuumtable

Working height

Outside dimensions

Exhaust air outlet

Colour

Weight

 

W x D = 1800 x 1000 mm

800 mm

W x D = 1880 x 1080 mm

Ø 75 mm flexible synthetic hose 5 meters

Silver

approximately 53 kg

 

Trap-tanks, Scrubbers, Storage tanks

 

Because in restoration and preservation are used many substances in solid form, as liquid, in vapour and in gaseous state, that are dangerous in general, but specially for the health, is it not only necessary to use special storage and treatment safety cabinets, but also that during the treatments of these substances they will be extracted or trapped or captured and neutralized.

 

Thinking of substances like Methanol, Ethanol, Acetone, Benzene, White spirit, Ammonia, Pentane, Chlorine, Chloroform, Ether, Ethylene Oxide, Formalin, Sodium Carbonate, Sodium Hydroxide, Hydrogen Peroxide, Kerosene, Pyridine, Nitric Acid, Thymol, Carbon Tetrachloride, Toluene, Glacial Acetic Acid, Hydrochloric Acid, etc.

 

JEZET has developed different systems, to be adapted on to the restoration machines and apparatuses, to cope with these dangerous solvents, acids and treatment substances.

 

JEZET TRAP-TANKS are based on the labyrinth principle in a completely closed reservoir, to catch the solvents, acids and treatment substances, in liquid form or droplets shape, mostly just dry or with water or with active carbon. Tap-tanks are made of black Polyethylene.

 

JEZET SCRUBBERS are based on the principle of large contact surface and sprayed scrubbing-solution (mostly water) to catch or/and to neutralize the solvents, acids and treatment substances, in vapour- or gas form and also made of black Polyethylene.

 

JEZET STORAGE TANKS and RESERVOIRS are developed to use mostly in combination for storage as well as a trap-tank or scrubber, to be used in multiple functions and make it more compact.

 

 

 

 

The JEZET MOISTURE OR LIQUID TRAPTANK TTR-25 labyrinth principle for capture of the solvents and condensing of fumes. Round housing constructed of hard Polyethylene of 25 litres with three-chamber separation system and vacuum-tight. Provided with an in -and outlet of hard Polyethylene pipe. Easy detachable lid with soft silicone seal and a stainless steel drain valve. Optical level indication. The outlet of the trap tank can be directly connected to a suction or vacuum device. Instead of water can the Trap-tank also be executed with an activated carbon filter.

 

The JEZET MOISTURE OR LIQUID TRAPTANK TTR-40 labyrinth principle for capture of the solvents and condensing of fumes. Round housing constructed of hard Polyethylene of 40 litres with three-chamber separation system and vacuum-tight. Provided with an in -and outlet of hard Polyethylene pipe. Easy detachable lid with soft silicone seal and a stainless steel drain valve. Optical level indication. The outlet of the trap tank can be directly connected to a suction or vacuum device. Instead of water can the Trap-tank also be executed with an activated carbon filter.

 

 

The JEZET MOISTURE OR LIQUID TRAPTANK TTV-65 labyrinth principle for capture of the solvents and condensing of fumes. Square housing constructed of hard Polyethylene of 65 litres with three-chamber separation system and vacuum-tight. Provided with an in -and outlet of hard Polyethylene pipe. Lid with soft silicone seal easy detachable by means of 4 quick release clamps, a stainless steel drain valve and water supply valve. Optical level indication. The outlet of the trap tank can be directly connected to a suction or vacuum device. Instead of water can the Trap-tank also be executed with an activated carbon filter.

 

 

 

The JEZET SCRUBBER JSC-500WP belongs to the direct neutralization type. This means that the gasses or vapours will be sucked direct into the scrubber solution (in this case water) and this solution (water) is at the same time also the suction and neutralization medium.

The SCRUBBER is completely made of extruded black Hard Polyethylene and consists of a vertical tubular reservoir with a maximum capacity of 500 litres. Inside the reservoir is situated the scrub or wash compartment consisting of a labyrinth of multiple horizontal plates. The drain pipe with ball-valve is situated at the bottom of the reservoir.

In the exhaust pipe of the clean air or neutral gasses, on the top cover is mounted a shower with a conical shape spay, to catch the eventual last remaining gas particles, the top cover is further executed with soft silicone seal and the water inlet with valve.

Around this reservoir is spiral welded a Polyethylene tube with a double function, firstly as residence time extension and secondly as pre-neutralization and on top of this Polyethylene tube is flange mounted the water powered ejector.

The vacuum suction force (-80kPa) of the ejector is caused by high velocity water pressure and is generated by a pneumatic membrane pump.

The suction inlet pipe of the ejector is provided with a non-return valve of Stainless steel and can be connected with a Disinfection chamber, autoclave or other apparatus with emissions of gasses or vapours.

The inlet of the pump is connected with the vertical tubular reservoir and the pressure side of the pump and the ejector are connected by means of a flexible reinforced hose made of EPDM and a fixed pipe of Polyethylene. All connections are made of Stainless steel.

 

 

 

 

This SCRUBBER was specially built to neutralize pure Ethylene-oxide mixed with nitrogen!

 Capacity

 Outside dimensions W x D x H

 Noise level

 Extract rate minimum

 Compressed air consumption

 Weight

 

 

500 Litres

1500 x 1100 x 2200 mm

70 dB

500 m³/h

2000 litres per minute by 8 Bar

150 kg

 

 

The JEZET STORAGE/TRAPTANK VvTR-120 Round housing constructed of hard Polyethylene of 120 litres with TWO-chamber separation system and vacuum-tight. Detachable lid provided with soft silicone seal, a central suction connection for water and air (to a Leafcaster), a connection for suction or vacuum device, electric pump inside with connection on the lid, an electric level control and an optical level indication. Connections pipe and electric are all quick release type. Mobile on 3 castors.

 

 

 

 

Capacity

Outside dimensions W x H

Noise level

Electric consumption

Weight

 

120 Litres

Ø 800 x 400 mm

55 dB

0,35 kW. single phase 230 V -50 Hz

45 kg

 

 

 

 

The JEZET STORAGE/TRAPTANK VvTR-300 Rectangular housing constructed entirely of black hard Polyethylene of 300 litres with multiple-chamber separation system for the capture of solids, liquids and fumes from solvents and vacuum-tight. Lid with soft silicone seal detachable by means of bolts, a stainless steel drain valve and water supply valve. A suction connection for water and air (to a MULTIRESTOR or Leafcaster), a connection for suction and/or vacuum device, electric pump inside with connection on the lid. Provided with an electric level regulator, which control the circulation pump and the tap, for the maintenance of the level in the storage tank.. Connections pipe and electric are all quick release type.

 

 

 

 

 

Capacity

Outside dimensions W x H

Noise level

Electric consumption

Weight

 

300 Litres

1500 x 1200 x 400 mm

55 dB

1,50 kW. single phase 230 V -50 Hz

85 kg

 

 

 

 

Filters made of Paper, Polyester, Polyurethane, Polypropylene, Polyethylene, Felt, Copper, Stainless Steel, Cotton, Carbon, Hepa,   

For Dry substances as Dust, Air, Gasses and Fumes

For Wet substances Water, Vapour, Solvents